Author: Reese Baloutine (she/her)
Links: ['https://www.linkedin.com/in/seedlingsgardening/']
Source: https://www.wikihow.com/Fix-Sinkholes
Monitor the hole to see if it grows. Sinkholes are often triggered by weather phenomena, such as a heavy rainstorm. Once a sinkhole has formed, though, it can continue to grow, as further portions of limestone or other carbonate rocks fall away. As long as a sinkhole continues to grow on a day-by-day basis, do not attempt to fill it in.
Once the sinkhole has stopped growing and remained the same size for a few days, you can fill it in.
Probe the size and depth of the sinkhole. Only relatively small, shallow sink-holes can be filled by homeowners. Take a pole or stick (even a tree branch would do), and probe around in the sinkhole. Note how deep and wide it is.
Exercise caution when walking around the edge of the sinkhole! The ground can be very unstable, so take care not to fall.
Do not attempt to fill in a sinkhole larger than 3 feet (0.91 m) in diameter. Large sinkholes can be deep and potentially dangerous.
If the sinkhole is deeper than chest height, do not step down inside of it. Deep sinkholes, and holes with steep walls, pose a high risk of collapse.
Landscaping companies will have more experience in dealing with this phenomenon than the average homeowner.
When dealing with very large sinkholes, you’ll need to contact local authorities in the city or county in which the sinkhole has appeared.
Dig out the outer edges of the sinkhole. The sinkhole may be larger underground than it appears on the surface. To determine the true extent of the sinkhole, use a shovel to expand the size of the sinkhole. Remove the sod around the edges of the sinkhole and make sure the surrounding ground is solid. Continue to remove the edges of the hole until you reach a point at which the topsoil and sediment are supported by solid rock.
Also remove any loose debris that may be in the sinkhole: tree branches, pinecones, etc.
Mix dry concrete powder with water. Start out by pouring about a third of the concrete mix into a large basin, such as a wheelbarrow. Pour in about 1 US-quart (946 ml) of water, and mix thoroughly with a hoe, shovel, or paddle mixer. Continue to add water until the concrete is wet throughout and a heavy putty consistency. Add gravel for increase the strength of the concrete.
You can buy 80-pound (36 kg) bags of quick-mixing concrete at your local hardware store or home-supply store.
The size and depth of the sinkhole will determine how much concrete you need to mix.
You do not need to let the concrete dry before you move on to filling the hole with sand and soil.
A “plug” simply means that you’ll fully fill the bottom of the sinkhole with concrete.
Sand can be purchased at most large hardware stores, home-supply stores, or landscape-supply stores. If none of these venues sell clayey sand, contact a building contractor in your area.
Most contracting companies will have a sand supplier that they may put you in touch with.
Fill the hole with topsoil. Fill whatever depth remains to the sinkhole with topsoil. This will bring the materials you used to fill the hole up to the level of the surrounding yard or terrain. Finishing the hole with topsoil will also allow plants to grow on top of the former sinkhole and stabilize the soil and sand.
Topsoil can be purchased by the bag at any gardening center or home-supply store.
Top off the hole with more soil in a few days. Over time, the sand and topsoil that you’ve added to the sinkhole will compact and settle. This will leave open room at the top of the sinkhole again. Use the rest of the topsoil to fill in the hole until it’s once again at the level of the surrounding terrain.
Repeat this process more than once, if necessary. The materials filling the sinkhole are likely to settle following heavy rain or runoff.
Avoid planting trees or shrubs over the sinkhole as the may not thrive due to a lack of nutrients in the soil. They could also become uprooted or fall if the hole collapses again.